Not sure if you noticed, but we’ve improved our adapters!
If you’ve purchased a kit after March 1, 2020 you likely have the new adapters. Here’s what to look for in the new editions.
New 1/2 Inch Adapter
Old 1/2 Inch Adapter
New 1/4 inch Adapter
Old 1/4 inch Adapter
New Right Angle Adapter
Old Right Angle Adapter
So let’s talk facts. If you look closely at the images you will notice the port center is a bit bigger on the newer adapters. You may be thinking, “The wider ports will have faster flow than the older ones.” The larger port size does NOT affect the speed of the evacuation. If you need more explanation on why port size doesn’t matter, take a look at this video. The port size only matters until 20,000 microns is hit, which is milliseconds worth of time in a normal vacuum.
So you’re probably asking yourself “Well why did they change their adapters then?” We made these changes for a few reasons; The newer adapters are a bit more compact, they look better and they have fewer brazing points.
If you’re looking for replacement gaskets
Which gasket to purchase?
AccuTools changed the brass adapters in late February 2020; it hit the shelves in early March. The differences between the parts is the older gasket is raised above the lip of the adapter. In the new adapters, the gaskets fit well within the fitting.
Part Number for older adapters SA10868
Part Number for new adapters SA10868-1
On both of my trublu hose 3/8 ffl adapters are coming apart, do you guys repair, both kits are relatively new, less than 6 months old
We would most likely replace the adapters. Call us at (954) 227-0781 so we can get some more details from you. Thanks!
Mine came apart as well 4 months old.
Sorry to hear that.. we did have a bad batch come through and we will replace the bad adapters. Give our technical support team a call at 954-227-1094
That’s a fax number super frustrated with these new 1/4” & 1/2” brass new style fitting the rings roll off with my two fingers the sun going down. Wow I didn’t swear
Try (954) 227-0781 and dial option 3 for tech support and I’ll get you new fittings.